MULTI-RANGE DIGITAL TIMER

dt_11.gif (8273 個位元組)dt_12.gif (9777 個位元組)

DT-1
    FEATURE
• High reliability, anti-noise, multi-types.
• Adopting high quality, power saving, and stable COOS IC.
• High accuracy, repeated tolerance less than ± 0.2dd%.
• DT-12 and 13 are in possession of both functions of Gate and Reset.
• From 99.99S to 9999H, Seven periods can be set and chosen by DIP SW. on flank of the case.
• Adopting 7-segment high light red LED for both day and night reading.
• Owing to characteristics of anti-noise and anti-low voltage, suitable for bad surroundings.
• Quality been guaranteed by individual computer testing.

　

●SPECIFICATIONS

Type DT-11 DT-12 DT-13
Mounting Front (Surface) / Bury (Flush)
Socket Type

US-08 / P3G-08 / P2CF-08
Indication

4-digital orange LED display ( high 8mm )
Timing Mode subtraction
Operating

Reset to switch on

 1.外部可控輸入 (1) restive (2) time out
2.Reset to switch on
Setting Memo. about 10 years (20°C)
Counting Memo. None Have
Reset Time Mini mum break contact time 200ms
Time Setting Range 99.99s(0.01s~)  999.9s(0.1s~)   9999s(1m~)
9999m(1m~)   9999H(1H~)  99m59s(1s~)  99H59M(1M~)
Output (Relay) 1C+1C(250V 3A) 1C(250V 3A) 1C+1C(250V 3A)
Rate Voltage AC:100V, 110V, 220V, 240V, 50/60HZ          DC:12V,24V
Power Consumption

Under 4AV
Ambient Temp -10°C~+60°C
Ambient Humidity 35%~85%RH

　

●DT-1 FUNCTIONS OF KEYS
dt_1_keys.jpg (11313 個位元組)		 ●MODE OF TIME
Holding down dt_1_1.gif (300 個位元組) button. press the dt_1_2.gif (231 個位元組) button to adjust the mode after 10 seconds.

＊Notes
.forced change unit in counting time ： Holding down 1.gif (217 bytes)hut ton press the dt_1_1.gif (300 個位元組)button and press dt_1_2.gif (231 個位元組)about 10s suspend connoting time (the GO light is blinking) you can not change the time unit (suitable for)

●EXPRESSION OF LAMP

S - second (99.99s~0.01s、999.9s~0.1s、9999s~1s)
M - minute (9999minute~1minute)
H - hour (9999hout~1hour)
M:S - minute : second (99:59~00:01 minute : second)
H:M - hour : minute (99:59~00:01 hour : minute)
ON - stavt output
UP - instant output
GO - destroying → counting time
　　 brightness → suspend counting time

●CONNECTION DIAGRAM

DT-11 DT-12 DT-13
dt.jpg (18438 個位元組)

●PANE CVTOUT(mm)：

dt24_2.gif (1868 個位元組)

 ●DIP SWITCH direction：
　 ON OFF
SW1 counting memo no mem (existent type)
SW2 self-test 5.55sec normal situation
SW3 instant 1c + delay 1c instant 2c output
SW4 Have None